Water Spray Installation - ESAB Silhouette 1000 Instruction Manual

Installation
SECTION 

Water Spray Installation

Mount the control valve in the pre-designated
mount hole on gas control panel. Align movement
IGNITOR
with on/off indicators and tighten nut to lock in
FUEL
place.
OFF
WATER
ON
OFF
P.H. OXY
OFF
IGNITOR DISENGAGE
Water Spray Control Valve
Install water manifold in front of gas manifold on
mount arm. Installation of the manifold block has
to be done before any of the distribution fittings are
applied.
Run water hoses from control valve outlet to
manifold and from manifold to water spray heads on
torches.
6