Domestic - ESAB Silhouette 1000 Instruction Manual

SECTION 1


Domestic

•
"Precautions and Safe Practices in Welding and
Cutting with Oxygen-Fuel Gas Equipment," Form
2035. ESAB Cutting Systems.
•
"Precautions and Safe Practices for Electric
Welding and Cutting," Form 52-529. ESAB
Cutting Systems.
•
"Safety in Welding and Cutting" - ANSI Z 49.1,
American Welding Society, 2501 NW 7th Street,
Miami, Florida, 33125.
•
"Recommended Safe Practices for Shielded
Gases for Welding and Plasma Arc Cutting" - AWS
C5.10-94, American Welding Society.
•
"Recommended Practices for Plasma Arc
Welding" - AWS C5.1, American Welding Society.·
"Recommended Practices for Arc Cutting" - AWS
C5.2, American Welding Society.
•
"Safe Practices" - AWS SP, American Welding
Society.
•
"Standard for Fire Protection in Use of Cutting
and Welding Procedures" - NFPA 51B, National
Fire Protection Association, 60 Batterymarch
Street, Boston, Massachusetts, 02110.
•
"Standard for Installation and Operation of
Oxygen - Fuel Gas Systems for Welding and
Cutting" - NFPA 51, National Fire Protection
Association.
•
"Safety Precautions for Oxygen, Nitrogen,
Argon, Helium, Carbon Dioxide, Hydrogen, and
Acetylene," Form 3499. ESAB Cutting Systems.
Obtainable through your ESAB representative or
local distributor.
•
"Design and Installation of Oxygen Piping
Systems," Form 5110. ESAB Cutting Systems.
•
"Precautions for Safe Handling of Compressed
Gases in Cylinders", CGA Standard P-1,
Compressed Gas Association.
Literature applicable to safe practices in welding and
cutting with gaseous materials is also available from
the Compressed Gas Association, Inc., 500 Fifth Ave.,
New York, NY 10036.
Safety Section
Safety