Table of Contents
Advertisement
Installation
Module is rotated
180 deg. to show
plug receptacle
FUEL
OFF
P.H. OXY
OFF
IGNITOR
IGNITOR
DISENGAGE
Automatic Ignitor
Introduction
The automatic oxy-fuel torch ignitor system provides
hands free ignition for the multiple oxy-fuel torches.
This system uses a high voltage spark between an
electrode and the plate surface to ignite oxy-fuel
preheat flames. When the system is energized,
preheat fuel gas and oxygen flow from the torch
nozzle. A high voltage transformer creates an
ignition spark between the ignitor electrode end
and the plate, which ignites fuel gas/oxygen mixture.
Ignitor installation
Mount ignitor module on the deck and the Ignition
Start module on the gas panel in the location
shown.
SECTION
6
Advertisement
Table of Contents
