Installing The Source Unit.39 - Clarion VRX8271 Owner's Manual And Installation Manual

4. INSTALLING THE SOURCE UNIT
■ Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Wire as shown in Section 7.
3. Insert the source unit into the universal
mounting bracket until it locks,
4. Mount the outer escutcheon so that all the
hooks are locked.
Notes:
1) Some car models require special mounting
kits for proper installation. Consult your
Clarion dealer for details.
2) Fasten the front stopper securely to prevent
the source unit from coming loose.
• Console opening dimensions
Instrument panel
—7
Stoppers
Special bolt
Screwdriver
Source Unit
Universal mounting bracket
Stoppers
2-Springs
Outer escutcheon
Note: Set the outer escutcheon
so that its metallic part on
the back side fits the
upper edge of the source
unit.
Figure 6
39