Clarion VRX8271 Owner's Manual And Installation Manual page 17

Changing area
Note:
• This function is not available when the display is
stored.
Depending on whether you use the unit in the
USA and OTHER, switch the area as follows:
1) Press the ADJ button 05] to go to the CON¬
FIGURATION display.
2) Slide the Up/Down button
[T]
to
A
(up) or
▼ (down) and move the cursor to
"AREA".
3) Slide the Up/Down button
IT]
to ► (right) to
switch the area (between in the USA and
OTHER).
* Set the USA usually.
4) Press the ADJ button 05] to return to the pre¬
vious mode.
* The new setting returns to the initial setting.
18