Clarion VRX8271 Owner's Manual And Installation Manual page 24

5) After entering the title, press and hold >/ll
(center) of the ENT button Q] for about 2
seconds.
* The title is stored when the beep sounds and
the previous mode is recalled.
Notes:
• The title list of the title select display in radio mode
displays only titles for the preset stations.
• After entering a title, if you change the reception
area, inconsistency between the entered title and
the frequency occurs.
Clearing the title
1) Select the mode where the title you want to
clear is stored (radio or CD changer mode).
2) Press the TITLE button |16] to go to the TITLE
CLEAR display.
1
2 BBB
3 CCC
4 DOD
5 -
6 -
3) Slide the Up/Down button [Q to T (down) or
A (up) to move the cursor to the title you
want to clear and press and hold ►/» (center)
of the ENT button Q] for about 2 seconds.
The title is cleared when the beep sounds.
4) Press the TITLE button 06) to return to the
previous mode.
Changing the title
1) Select the mode where the title you want to
change is stored (radio or CD changer
mode).
2) Press the TITLE button ® to select the title
input display.
Change the title using the procedure
described in step 3) above and in the sub¬
section "Entering a title" (page 24).
Selecting the title
1) Select the mode where the title you want to
select is stored (radio or CD changer mode).
2) Press the TITLE button [f6j twice to select the
TITLE SELECT display.
The entered titles appear after the title numbers.
-ri-i-i r= pu= i f=rrr
FMl
1 AAA
2 BBB
3 CCC
>.r
•
4 ODD
5 EEE
6 FFF
_FMl 98,1 CH2
* In CD mode, the TITLE SELECT display can¬
not be selected.
* In radio mode, slide the Up/Down button [T] to
(left) or ► (right) to select a band.
3) Slide the Up/Down button Q] to ▼ (down) or
A (up) to move the cursor to the title to be
selected. Press (center) of the ENT but¬
ton Q] to tune in to the selected station.
* Press the TITLE button [j6] twice to quit the
TITLE SELECT display.
25