Cd Changer Mode Operations.19 - Clarion VRX8271 Owner's Manual And Installation Manual

CD Changer Mode Operations
This unit can control a separately sold CD
changer to store and play up to 18 CDs.
Note:
• CD-ROM discs cannot be played.
Listening to a CD
1) Press the FUNC button E and select CD
changer mode. Playback starts automatically.
2)
Press one of the Disc No. buttons
[El
(No.1 to
No.6) corresponding to each CD to select
one.
*The selected CD No. becomes pink in the dis¬
play.
Note:
•
If a slot in a magazine is empty, that slot No. does
not appear in the display and cannot be selected.
3) Slide the Up/Down button Q] to ► (right) or
4
(left) to select a track (song).
► : Selects the next track. (Example: The
third track from the current one is select¬
ed by sliding the button 3 times.)
To return to the beginning of the current
track, slide the Up/Down button jTj once
to ◄ (left).
◄ : Selects the previous track. (Example:
The third track before the current one is
selected by sliding the button 1+3=4
times (the first sliding returns you to the
beginning of the current track).)
Notes:
•
After CD No. 6 is played, CD No. 1 is played
again. However, when a CD changer capable of
storing 12 or 18 CDs is connected to the unit, all
CDs in all magazines are played sequentially
(unless the magazine is locked).
• The empty slot No. is skipped and the next CD is
played.
Fast-forward and fast-backward
1) Slide and hold the Up/Down button Q] to ►
(right) and
4
(left). The CD fast-forwards or
fast-backwards while the button is being held.
► : Moves forward 3 times faster than normal
play when you slide it for about 1 second
and 15 times faster than normal play
when you slide it for 5 seconds or longer.
◄ : Moves backward 3 times faster than nor¬
mal play when you slide it for about 1 sec¬
ond and 15 times faster than normal play
when you slide it for 5 seconds or longer.
Note:
•
Slide the Up/Down button [T] to ► (right) or
4
(left) for 1 second or shorter to switch the tracks.
2
) Release the button when you reach the
desired track to start playback.
Pausing playback
1) Press ►/!! (center) of the ENT button Q] to
pause playback.
*
"PAUSE"
appears in the display.
2) Press ►/!! (center) of the ENT button 00
again to resume playback.
Scan play
This function plays the first 10 seconds of all the
tracks on the current CD (track scan) or first 10
seconds of the first track of all the CDs in the CD
changer (disc scan).
1) Press the DISP button Sol to select SCN/
RPT/RDM mode.
2) Press No.1 of the Preset buttons GO to start
track scan. Scanning starts from the next
track of the current one.
Press No.1 of the Preset buttons
GO
for about
2 seconds to start disc scan. Scanning starts
from the next disc of the current one.
* I scn I becomes pink and 1T-SCN1 or ID-SCNI
appears in the display.
* Turning off the power cancels scan play.
3)
Press No.1 of the Preset buttons
GO
when
you reach the track you want to listen to.
Playback resumes.
Repeat play
This function plays the current track (track repeat)
or the current CD (disc repeat) repeatedly.
1) Press the DISP button Qoj to select
SCN/RPT/RDM mode.
2)
Press No.2 of the Preset buttons
GO
to start
track repeat or press it for about 2 seconds to
start disc repeat.
19