Other Functions - Clarion VRX8271 Owner's Manual And Installation Manual

Other Functions
Note:
• The following operation is not available when the
display is stored.
Switching the spectrum analyzer
display
The spectrum analyzer display pattern can be
switched in radio or CD changer mode.
Each time you press and hold the DISP button
n for about 2 seconds, the spectrum analyzer
display pattern switches in the following order:
SPECTRUM
I
SPECTRUM PEAKS
I
MIRROR IMAGE
Character display
t
REV. SPECTRUM
Notes:
• In ISR mode, the spectrum analyzer patterns can¬
not be displayed.
• The spectrum analyzer turns off temporarily in
some mode or during some key operation.
Switching the button color
Button color can be switched between green
and amber.
1) Press the ADJ button 05] to select the CON¬
FIGURATION display.
2) Each time you slide the Up/Down button
Li]
to ► (right), the button color toggles between
green (ILLUMI1) and amber (ILLUMI2).
3) Press the ADJ button (TU to return to the pre¬
vious mode.
Switching the background color
The background color of the display can be
switched between blue and black.
1) Press the ADJ button @5] to select the CON¬
FIGURATION display.
2) Slide the Up/Down button
El
to ▼ (down) or ▲
(up) to move the cursor to "COLOR".
3) Each time you slide the Up/Down button
El
to ► (right), the background color toggles
between blue (COLOR1) and black
(COLOR2).
4) Press the ADJ button 05] to return to the pre¬
vious mode.
Always turning on the button illumi¬
nation on the operation panel
The button illumination on the operation panel,
when the display is turned upward, can be
switched between "AUTO" and "OFF".
AUTO: Button illumination on the operation
panel turns on for 5 seconds.
OFF : Button illumination is always on when
the power is turned on.
23