Clarion VRX8271 Owner's Manual And Installation Manual page 14

Setting the clock
Note:
• This [unction is not available when the display is
stored.
1
) Press the ADJ button 05] to go to the CON¬
FIGURATION display.
2) Slide the Up/Down button lO to ▼ (down) or
A
(up) and move the cursor to
"CLOCK".
3) Press ►/!! (center) of the ENT button HJ to
go to clock setting mode.
4) Slide the Up/Down button
!
0
]
to
<
(left), ►
(right), ▲ (up), or ▼ (down) to set a time.
Increments the figure.
Selects the minute
Decrements the figure.
◄ : Selects the hour (the hour becomes blue
and can be changed).
► : Selects the minute (the minute becomes
blue and can be changed).
▲ : The hour or minute increments while the
corresponding figure is blue.
▼ : The hour or minute decrements while
the corresponding figure is blue.
5) After adjusting the time, press ►/» (center)
of the ENT button [Tj to set it.
* Pressing ►/!! (center) of the ENT button Q]
resets the second to zero.
6
) Pressing the ADJ button 05] returns the mode
to the previous one.
Notes:
• The time is always displayed in radio and CD
changer modes.
• When the clock mode is turned on when the dis¬
play is stored, after a station is tuned in, the fre¬
quency is displayed for several seconds, then the
time will be displayed.
Turning on and off the clock display
Note:
• This function is not available when the display is
stored.
1) Press the ADJ button 05] to go to the CON¬
FIGURATION display.
2) Slide the Up/Down button [T] to ▲ (up) or ▼
(down) to move the cursor to
"CLOCK".
3) Each time you slide the Up/Down button
i
TJ
to ► (right), the clock display turns on and
off.
4) Press the ADJ button 05] to return to the pre¬
vious mode.
15