Download
Share
Print this page
Schlage Connect BE469ZP Quick Start Manual
  1. Manuals
  2. Brands
  3. Schlage Manuals
  4. Door locks
  5. Connect BE469ZP
  6. Quick start manual

Schlage Connect BE469ZP Quick Start Manual

Smart deadbolt
Hide thumbs

Advertisement

Quick Links

Download this manual
Quick Start Guide

Advertisement

loading

Related Manuals for Schlage Connect BE469ZP

Summary of Contents for Schlage Connect BE469ZP

  • Page 1 Quick Start Guide...
  • Page 2 Backplate Battery Backup Key Cover Touchscreen Assembly Inside Assembly Parts Thumbturn Strike Reinforcement Plate Bolt Set Screw Backplate Reinforcement Screws Screws Bolt/Strike Inside Assembly Screws Screw...
  • Page 3 Interactive experience For an improved installation experience, follow the link below or scan the QR code for online interactive instructions, warranty, and reference information. https://instructions.allegion. com/instr/86/2110...
  • Page 4 Tools Phillips screwdriver Don’t use a power drill! Support U.S.A.: 888-805-9837 Canada: 800-900-4734 Mexico: 018005067866...
  • Page 5 step Need Help? See “Help with Step 1” in the online instructions. The link is on the back cover or the third page of this guide. Install the bolt. You may have to adjust your bolt length. Make sure the slot in the bolt is centered in the hole.
  • Page 6 Need Help? step Trouble installing the strike reinforcer? See “Help with Step 2” in online instructions. Install the strike into the door frame. If you have a window next to your door, you may not be able to use the longer wood screws to install the reinforcer. Install this strike reinforcer for...
  • Page 7 Is it hard to install the touchscreen? step Is the tailpiece not installing correctly? If the hole through your door seems too small, you may need to remove the spacer. See the online instructions. Install the touchscreen. Route the cable through the door BELOW the bolt. Align the tailpiece as shown and push the touchscreen onto the door.
  • Page 8 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Install the inside backplate. Route the cable below the bolt and through the hole on the bottom of the backplate. Secure the backplate with screws. Make sure that “TOP”...
  • Page 9 step Take off the battery cover.

  • Page 10: Connect The Cable

    step Connect the cable. The connector fits only one way.
  • Page 11 step Secure the lock to the door. If the bump on the tailpiece doesn’t align with the slot in the back of the inside assembly, make sure your thumbturn is vertical (up and down). Tuck the wire into the channel. Tuck wire.
  • Page 12 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Install the screws. Install the lower screw first. Actual Size Actual Size...
  • Page 13 step Install batteries and slide the cover on.
  • Page 14 step Set up your lock. 1. Open your door! 2. Enter one of the two default user codes. The codes are located on the back of this guide and on the back of the inside assembly. You need to remove the inside assembly to see the label.
  • Page 15 Need Help? step If the bolt doesn’t extend or retract during testing, see the online instructions and make sure spindle is aligned properly. Test your lock. 1. Close your door. 2. Extend and retract the bolt using the inside thumbturn. 3.
  • Page 16 step Enroll your lock. 1. Place your smart home system or panel into enrollment mode (see documentation for that device for details). 2. Remove the battery cover. 3. Press then release button. 4. A yellow flashing light indicates enrollment is in progress. 5.

  • Page 17: Lock And Unlock

    Lock and unlock To lock your door just tap the logo. You can also lock your door by entering a user code while the door is closed or by turning the thumbturn toward the door edge. To unlock your door enter a user code.
  • Page 18 Add and delete codes • The lock supports user codes between 4 and 8 digits and is set Press Enter to a default length of 4 digits. Programming • The first 4 - 6 digits must be Code different from the first 4 - 6 digits (6 digits) of the programming code.

  • Page 19: Factory Default Reset

    Factory default reset If you have forgotten your programming code, you can restore the default codes. If you want to move the lock to a different door, you need to restore default settings. Move the lock to the new door, and then set it up again.
  • Page 20 Save this guide! Access step-by-step instructions and help. https://instructions. allegion.com/ instr/86/2110 *P518-669* © Allegion 2018 Printed in U.S.A. P518-669 P518-669 Rev. 01/19-b...