Table of Contents
Advertisement
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2
or
to the required subscriber alias.
3 Perform one of the following actions:
•
Press the Menu Select button directly below Optn and proceed to the next step.
•
or to scroll through the available IDs for the selected subscriber alias and proceed to
6.
4
or
to Call and press the Menu Select button directly below Sel.
5
or
to select the call type.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8 Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
7.4.2
Adding a New Contact Entry
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2
or
to [New Contact] and press the Menu Select button directly below Sel .
3
or
to Name and press the Menu Select button directly below Edit.
The display shows Edit name and a blinking cursor appears.
4 Use the keypad to enter the name and press the Menu Select button directly below Ok once
you have entered the name.
To cancel this operation, press the Menu Select button directly below Cncl to return to the
previous screen.
5
or
to [Add Number] and press the Menu Select button directly below Sel .
6
or
to Number 1 and press the Menu Select button directly below Edit .
The display shows Edit Num 1 and a blinking cursor appears.
7 Use the keypad to enter the number and press the Menu Select button directly below Ok once
you have entered the number.
68012002065-HW
Chapter 7 : Advanced Features
step
59
Advertisement
Table of Contents
