Table of Contents
Advertisement
Parameter Setting Method
Numeric Keypad
Ring-type numeric keypad composed of numeric keys (from 0 to 9) and the decimal
point/symbol key. If the current cursor selects the input field, you can press the
numeric key to input a number and press
ring-type numeric keypad, you ca also perform the following operations:
•
Press the knob to confirm the input.
•
Press
•
Press
Unit Selection Keys
When setting parameter with the ring-type numeric keypad on the front panel, you
can use the keys to select the unit of the parameter.
•
phase, press
press
•
/
when setting time/amplitude/offset, use the unit (μ/m/n) after "/". For example,
when setting the frequency, press
setting the period, press
TIP
When the set value exceeds the limit value, the instrument automatically adjusts the parameter
to meet the requirements.
Arrow keys
•
In normal mode, you can use the keys to move the cursor to select the desired
menu item. It is equivalent to rotating the knob.
•
In parameter editing mode, you can use the keys to select the digit place to be
modified.
•
When inputting parameters using the ring-type numeric keypad,
delete the character while
field.
DG900 Pro Quick Guide
18
to delete characters.
to cancel the input.
: sets the parameter unit to the default one. For example, when setting the
>
to set the phase to 1°; when setting the frequency,
>
to set the frequency to 1 Hz.
/
: when setting the frequency, use the unit (M/k/G) before "/";
>
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to input ".", "-", or "+". When using the
>
to set the frequency to 1 kHz; when
to set the period to 1 ms.
is used to cancel the input and close the input
is used to
Advertisement
Table of Contents
