Bender ISOMETER iso685 CN Series Quick Start Manual page 2

ISOMETER® iso685...CN
由于安装不正确而导致损坏的风险 !
连接多个绝缘监视仪可能会导致安装损
坏 此外，如果连接超过一台绝缘监视
。
警告
仪，设备将不起作用，并不会发出绝缘故
障警报 。
与 IT 系统断开 !
在装置进行绝缘或者电压测试之前，绝缘
监视仪必须与 IT 系统断开，并且保证测
警告
试持续时间
。
安装
螺丝安装 /Screw mounting
108
72
54
2
否则，设备可能会损坏
ØM4
Damage to property due to incorrect ins-
tallation!
There should only be one insulation monito-
CAUTION
ring device per conductively connected insta-
llation. Damage to the installation may result
if several insulation monitoring devices are
connected. In addition, the device will not
function and will not report an insulation fault
if more than one insulation monitoring device
is connected.
Disconnect from the IT system!
The insulation monitoring device must be dis-
connected from the IT system before insula-
CAUTION
。
tion or voltage tests at the installation and
must remain so for the duration of the test.
Otherwise the device may be damaged.
Installation
0 mm
导轨安装 /DIN rail mounting
18
20 mm
20 mm
108
54
iso685_D00022_09_Q_ZHEN/10.2018
0 mm