Table of Contents
Advertisement
2.0 When and how to use the FireSAFE+ Installation & Operating instructions
Prior to Installation, Commissioning and System Verification of this product, the installer
should fully read these Safety, Installation and Operating instructions.
The Installation and operation must also comply with local regulations and accepted codes of
good practice.
The user is responsible for periodic inspection of the product, at a recommended interval of no
more than 12 months.
The use of this product requires experience with and knowledge of the product.
Children and persons with reduced physical, sensory, or mental capabilities must not use this
product, unless they are under supervision or have been instructed in the use of the product by
a person responsible for their safety.
2.1 Symbols used in this document
WARNING/CAUTION
DANGER
2.2 Scope of these Instructions
These Installation and Operating instructions apply to the: FireSAFE+
For Technical Information consult the FireSAFE+ Datasheet
For CM Pump specific information please consult the CM Installation and Operating
manual and datasheets.
All the above documents can also be found on the Grundfos Product Centre
website at:
www.grundfos.com/uk
If these safety instructions are not observed, it may
result in personal injury or damage to
property/equipment.
If these safety instructions are not observed, it may lead
to electric shock with consequent risk of serious
personal injury or death.
6 |
P a g e
Advertisement
Table of Contents
