English (Gb) Safety Instructions - Grundfos PowerAdapt Installation And Operating Instructions Manual

English (GB) Safety instructions

Original safety instructions
These safety instructions give a quick overview of the
safety precautions to be taken in connection with any
work on this product. Observe these safety
instructions during handling, installation, operation,
maintenance, service and repair of this product.
These safety instructions are a supplementary
document, and all safety instructions will appear
again in the relevant sections of the installation and
operating instructions. Keep these safety instructions
at the installation site for future reference.
Electrical connection
WARNING
Electric shock
Death or serious personal injury
‐
Switch off the power supply before
making any electrical connections.
Make sure that the power supply can-
not be switched on unintentionally.
‐
All electrical connections must be car-
ried out in accordance with the sepa-
rate wiring diagrams delivered with the
system.
‐
Check and fasten the connectors with
appropriate torque when the installa-
tion is finished. The torque value is 1.2
- 1.5 Nm.
CAUTION
Hot surface
Minor or moderate personal injury
‐
Some areas of the cabinet may get
hot. Those areas are marked with a la-
bel.
Servicing the product
WARNING
Electric shock
Death or serious personal injury
‐
Switch off the power supply before
starting any work on the product. Make
sure that the power supply cannot be
switched on unintentionally.
‐
After power off, wait the amount of time
stated on the label on RSI before work-
ing on the product. For further informa-
tion, see the installation and operating
instructions for RSI.
‐
All electrical connections must be car-
ried out in accordance with the sepa-
rate wiring diagrams delivered with the
system.
4
Maintenance
DANGER
Electric shock
Death or serious personal injury
‐
Maintenance and inspection must be
performed by a qualified electrician.
DANGER
Electric shock
Death or serious personal injury
‐
Disconnect the power sources and en-
sure continuous disconnection during
maintenance of the drive and load.
Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin
symbol on a product means
that it must be disposed of
separately from household
waste. When a product
marked with this symbol rea-
ches its end of life, take it to a
collection point designated by
the local waste disposal au-
thorities. The separate collec-
tion and recycling of such
products will help protect the
environment and human
health.
See also end-of-life information at
www.grundfos.com/product-recycling.