To Close The Indoor Unit; Mounting The Indoor Unit; To Install The Indoor Unit - Daikin ETBH16EF6V Installation Manual

4 Unit installation
2
2 If you have to connect electrical wiring, remove the switch box
cover.
3 If you have to do work behind the switch box, open the switch
box.
2×
4 If you have to do work behind the user interface panel or upload
new software into the user interface, open the user interface
panel.
Installation manual
6
2
1
3
4×
2
2×
1
5 Optional: Remove the user interface panel.
NOTICE
If you remove the user interface panel, also disconnect the
cables from the back of the user interface panel to prevent
damage.
3
X 1 A
1
X 1 4 Y
2
4.2.2

To close the indoor unit

1 Reinstall the user interface panel.
2 Reinstall the switch box cover and close the switch box.
3 Reinstall the front panel.
NOTICE
When closing the indoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
4.3

Mounting the indoor unit

4.3.1

To install the indoor unit

1 Fix the wall bracket (accessory) to the wall (level) with 2 Ø8 mm
bolts.
3
2
3
ETBH/X16EF6V+9W
Daikin Altherma 3 H HT W
4P644727-1 – 2021.02