Premium Carbon Filter Removal / Installation Instructions -Kuhl - Friedrich Kuhl KCS12B10A Service Manual

Premium Carbon Filter Removal / Installation Instructions -Kuhl

1. Remove the filter per Standard Filter Removal Installation Refer to Figure 404 and 405.
2. Hold the filter at the top and slide the grip out as shown on Figure 406.
3. If you already have a carbon filter installed remove the dirty filter by laying the filter down and swinging open the front frame as shown in
Figure 407.
NOTE: Make sure the frame with the mesh is facing toward you.
4. Place the new carbon filter on the top of the back filter frame. The carbon filter has been cut to the correct dimension and should fit within
the frame as shown in Figure 409.
NOTE: The carbon filter is not a reusable filter, and needs to be replaced every three months for optimum efficiency.
5. Slide the filter handle back on to hold the frames together and slide the assembly into the unit as per the instructions
on the door.
NOTE: The filter handle slides into the frame in only one direction. If the tab in the frame stops the handle from sliding in, slide the handle from
the other direction. DO NOT FORCE THE HANDLE INTO THE FRAME.
46
ROUTINE MAINTENANCE
FRONT FRAME WITH
MESH FILTER
Figure 408
ALIGN HOLES WITH
PROTRUSION
Figure 409