Table of Contents
Advertisement
3-22.
FWD BACK TENSION (See Fig. 3-25.)
1)
Set the torque cassette (Ref. No. J-6).
2)
Set the FWD mode and confirm that S reel table torque
value is within 9 to 13 gecm.
3) _ If the torque value does not meet the specification, adjust the
adjust arm @.
Fig. 3-25.
3-23.
REEL TORQUE CHECK
1)
2)
o)
4)
5)
—I7-—
Set the torque cassette.
Set the FWD mode and confirm that T reel table torque
value is within 7 to 15 gecm.
Set the REV mode and confirm that S reel table torque value
is within 29 + 6 gecm.
Set the REV mode and confirm that T reel table torque value
is within 13 to 25 gecm.
If a torque value does not meet the specifications above,
replace the corresponding reel table.
Advertisement
Table of Contents
