Table of Contents
Advertisement
1336 PLUS and 1336 FORCE
Refer to the product manual for connection information. On larger
horsepower 1336 PLUS and FORCE drives with an open Communications
Module mounted in the drive, no separate SCANport cable connection is
required.
SMP 3
An Allen-Bradley SCANport cable is used to make the connection between
the Communications Module and an SMP3.
Figure 3.10
SCANport Connection on Communications Module
SMP 3
Communications Module
Chapter 3
Installation
SMP3
Connection
Enclosed
AB0408B
3-17
Advertisement
Table of Contents
