1336 Plus And 1336 Force; Smp 3 - Allen-Bradley Bulletin 1203 Series User Manual

1336 PLUS and 1336 FORCE

Refer to the product manual for connection information. On larger
horsepower 1336 PLUS and FORCE drives with an open Serial
Communications Module mounted in the drive, you do not need a
separate SCANport cable connection.
Connection information for the 1336 PLUS and 1336 FORCE is
shown on page 2–11.
Important: The maximum cable distance between any two devices
cannot exceed 10 meters (33 feet) of cable.
1394
Refer to the product manual for connection information.

SMP 3

An Allen-Bradley SCANport cable is used to connect the Serial
Communications Module to an SMP3.
Important: The maximum cable distance between any two devices
cannot exceed 10 meters (33 feet) of cable.
SCANport Connection on Serial Communications Module
Port 1
Port 2
SMP 3
Installation
SMP3
Connection
Human Interface
Enclosed
Communications Module
AB0408B
1203–5.5 September 1995
2–17
Module