Missing values were not available at the time of
going to press.
Maximum permissible speed
Model
All models
Trailer hitch
General notes on the trailer hitch
Modifications to the cooling system may be nec-
essary, depending on the vehicle model. The ret-
rofitting of a trailer hitch is only permissible if a
trailer load is specified in the vehicle documents.
Further information can be obtained at a qualified
specialist workshop.
Mounting dimensions of the trailer hitch
1
Fastening points
2
Overhang dimension
3
Rear axle centre line
F236 0017 02
Technical data 677
The overhang dimension and fastening points are
valid for a trailer hitch installed at the factory.
Missing values were not available at the time of
going to press.
Overhang dimension length
Model
2
Overhang dimen-
CLE 200 4MATIC
CLE 450 4MATIC
All models
Towing capacity
%
The drawbar load is not included in the towing
capacity.
The values for the trailer load, braked trailer
apply with a minimum start-off climbing ability
of 12 %.
Missing values were not available at the time of
going to press.
sion
1203 mm