Mercedes-Benz CLE Coupe 2023 Owner's Manual page 377

If the user profile is activated when driving,
the driver's seat position will not be adjusted.
User-specific content
Depending on the vehicle equipment you can, as
a user, save the following settings, for example:
Driver's seat, steering wheel and mirror set-
R
tings
Climate control
R
Ambient light
R
Radio (including station list)
R
Suggestions
R
This function is an on-demand feature
( page 80): If the vehicle key is linked to the
/
user profile, the user profile is pre-activated when
unlocking the vehicle or approaching a vehicle
with KEYLESS-GO. Light, mirror and seat adjust-
ments are made during this process. To use a
user profile or an application, the vehicle key also
serves as a sensor input for authorisation.
You can watch an animation on this topic via the
following link:
▌Adding a user
Requirements:
The vehicle is stationary.
R
Multimedia system:
© f Select user
4 5 5
Select f Add user.
#
A QR code is loaded.
Scan the displayed QR code with the
#
Mercedes me App or any QR code scanner on
a mobile device. If the Mercedes me App is
not yet installed on your mobile device, you
will be directed to the store of your mobile
device.
Follow the steps in the Mercedes me App.
#
The vehicle is connected with your Mercedes
me user account. This automatically creates
your user profile in the vehicle.
If only your user profile is available, it will be
loaded automatically.
If more than one user profile is available, you
will be directed to the user selection.
F236 0017 02
MBUX multimedia system 375
When the vehicle is stationary, the set-up
assistant starts automatically after user selec-
tion.
%
When the user has been added, they can be
selected ( page 377).
/
▌Selecting user options
Requirements
A user has been selected.
R
Multimedia system:
© f Settings
4 5 5
Protecting user-specific content and applications
If you add a new user, access protection is
already activated for the user profile. The
Mercedes me PIN and, depending on the vehicle
equipment, biometric sensors are available for
access. Biometric sensors in the vehicle must be
taught in. The authentication process then takes
all taught-in and available sensors into account.
The following user-specific content and applica-
tions are protected, for example:
User selection and user profile settings
R
Biometric sensors
R