Mercedes-Benz CLE Coupe 2023 Owner's Manual page 303

iced over, damaged, inconveniently positioned,
insufficiently illuminated or distorted.
Active traffic signs with LED displays may not
R
be detected correctly or at all due to technical
factors, suchas transmission frequency.
If the information on the navigation system's
R
digital map is incorrect, incomplete or out of
date.
If the signs, road markings or road layout are
R
ambiguous, e.g.in the case of traffic signs on
construction sites, at exits and driveways, in
the case of adjacent lanes or parallel roads, in
the case of pedestrian crossing markings at
traffic lights
If the signage or road markings do not comply
R
with the standard
If the signage, road markings, or road guid-
R
ance is country-specific and deviates from the
navigation system's route guidance, e.g.in or
after road works
After sharp turns and tight bends, traffic signs
R
are outside the camera's field of vision.
If you overtake vehicles with traffic signs
R
affixed or attached to them.
If you use transport equipment secured to the
R
vehicle with a trailer coupling, suchas a bicy-
cle rack, restrictions for car/trailer combina-
tions may be considered valid if applicable.
▌Setting Traffic Sign Assist
Multimedia system:
© Settings Assistance
4 5 5
Assistance Traffic Sign Assist
5 5
Activating or deactivating the speed warning
%
The speed warning is switched on by default
(depending on the country).
Switch off Speed limit warning.
#
The speed warning remains off according to
country-specific legislation until the next time
the vehicle is switched on or off and the driv-
er's door is opened.
%
The audible speed warning can also be
switched off and on using the quick-access
function, by pressing and holding the mute
button on the steering wheel, by pressing the
speed icon in the status line of the central
display or via a voice control command (func-
tions are available depending on the country).
F236 0017 02
Driving and parking 301
Change the type of speed warning
Change the warning to Visual only
#
and acoustic.
Setting the warning threshold
This value determines the speed at which a warn-
ing is issued when exceeded.
Set the desired speed under Warning Thresh-
#
old.
%
The availability of the function is subject to
country-specific legislation.
Switching the advisory tone for a new speed limit
on or off
%
The advisory tone for a new speed limit is
switched off at the factory.
The function determines whether a subtle, non-
intrusive sound supports each change of the dis-
played speed in the driver's display.
Activate or deactivate the function.
#
%
The availability of the function is dependent
on the country.
or Visual