Mercedes-Benz CLE Coupe 2023 Owner's Manual page 552

550 Wheels and tyres
* NOTE Damage to the vehicle due to the
jack
If you do not position the jack at the jack sup-
port points provided for this purpose, you
could damage your vehicle.
Only position the jack at the jack sup-
#
port points provided for this purpose.
Take the ratchet out of the tyre-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
2
Position support of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet 3 until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
F236 0017 02
Removing a wheel
Requirements
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
Do not raise the wheels by the plastic
#
elements when removing and reposition-
ing.
4
on jack sup-
* NOTE Damage to threading from dirt on
2 wheel bolts
1 and
Do not place wheel bolts in sand or on a
#
dirty surface.
Unscrew the uppermost wheel bolt com-
#
pletely.
page 550).
/
page 548).
/