Usb Configuration - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

Configuring firmware
3.4 "Advanced" tab
Firmware setting
Onboard Ethernet [Mac Address]
2 Address
Onboard Ethernet
3 (LAN 3, X3 P1)
Onboard Ethernet [Mac Address]
3 Address
Onboard Ethernet
4 (LAN 4, X4 P1)
Onboard Ethernet [Mac Address]
4 Address
3.4.10

"USB Configuration"

Calling "USB Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "USB Configuration".
Firmware setting
USB Port Per-Port Enabled
Control
Disabled
The following options show only when "USB Port Per-Port Control" = "Enabled".
NOTICE: USB X60, USB X61 and USB X62 are unavailable for IPC BX-56A.
USB X60 Enabled
Disabled
USB X61 Enabled
USB X62 Enabled
Disabled
USB X63 Enabled
Disabled
USB X64 Enabled
Disabled
USB X65
Enabled
Disabled
USB X66 Enabled
Disabled
USB Port Enabled
(Internal USB
Disabled
X9300)
18
Value Setting in delivery state
Enabled x
Disabled
Enable x
Disable
Value Setting in
delivery state
BX-56A BX-59A
x
x
x
x
x
x
The Onboard Ethernet 2 address is defined by
this value.
x The onboard Ethernet interface "X3 P1" is
enabled.
The onboard Ethernet interface "X3 P1" is
disabled.
The Onboard Ethernet 3 address is defined by
this value.
x The onboard Ethernet interface "X4 P1" is
enabled.
The onboard Ethernet interface "X4 P1" is
disabled.
The Onboard Ethernet 4 address is defined by
this value.
Enable or disable the USB ports control.
x
x Enable or disable the USB X60.
x USB X61 is enabled permanently.
x Enable or disable the USB X62.
x Enable or disable the USB X63.
For IPC BX-56A, USB X63 is enabled permanently.
x Enable or disable the USB X64.
x Enable or disable the USB X65.
x Enable or disable the USB X66.
x Enable or disable the Internal USB X9300.
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Meaning
Meaning
Operating Instructions, 10/2023, A5E52427534-AA