Power" Tab - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

Firmware Value
setting
Password Enabled
Management
Interface
2
Disabled
: Only visible with device configuration with Trusted Platform Module (TPM) (Page 33).
1
: Only visible after you set the Supervisor Password.
2
3.6

"Power" tab

Device behavior after a power failure and after a "wake event".
Calling "Power" tab
Select: "Setup Utility (Page 10)" > "Power".
Firmware Value
setting
Advanced CPU
Control
(Page 26)
XHCI USB Wake
Enabled
Capability
Disabled
The following options show only when "XHCI USB Wake Capability" = "Enabled".
NOTICE: USB Port X60 Wake Capability, USB Port X61 Wake Capability and USB Port X62 Wake Capability are unavailable for
IPC BX-56A.
USB Port X60
Enabled
Wake Capability
Disabled
USB Port X61 Enabled
Wake Capability
Disabled
USB Port X62 Enabled
Wake Capability
Disabled
USB Port X63 Enabled
Wake Capability
Disabled
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Setting in
delivery state
x x Enable the interface for password configuration.
The password settings can be configured through software.
You need current password to make changes.
Disable the interface for password configuration.
The password settings can only be configured through the
firmware settings.
Setting in
delivery state
BX-56A BX-59A
Control various CPU parameters.
The Wake Capability of all XHCI USB Ports is enabled.
x x The Wake Capability of all XHCI USB Ports is disabled.
The USB port X60 is allowed to wake up the system from the
S4/S5.
x The USB port X60 is not allowed to wake up the system from the
S4/S5.
The USB port X61 is allowed to wake up the system from the
S4/S5.
x The USB port X61 is not allowed to wake up the system from the
S4/S5.
The USB port X62 is allowed to wake up the system from the
S4/S5.
x The USB port X62 is not allowed to wake up the system from the
S4/S5.
The USB port X63 is allowed to wake up the system from the
S4/S5.
x x The USB port X63 is not allowed to wake up the system from the
S4/S5.
Configuring firmware
3.6 "Power" tab
Meaning
Meaning
25