Siemens SIMATIC IPC BX-56A Operating Instructions Manual page 35

Configuring AMT function
The AMT function is disabled as the default value.
To configure AMT, open the firmware selection menu (Page 9) and select "MEBx". To learn
more about it, refer to Intel® Active Management Technology
(https://www.intel.com/content/www/us/en/developer/articles/guide/getting-started-with-
active-management-technology.html).
Note
Enable AMT BIOS Feature
To configure the AMT function, make sure you have enabled the AMT BIOS Feature in Active
Management Technology Configuration in "Advanced" tab. Otherwise, you cannot access to
MEBx.
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
8
35