Table of Contents
Advertisement
186 Seats and stowing
Loops on the rear sides
Briefly pull one of red release loops 2.
#
To fold the left or right seat backrest back: pull
#
one of black release loops 1.
▌Adjusting the angle of the rear seat backrests
(cargo position)
& WARNING Risk of an accident because
the rear bench seat and the seat backrest
is not engaged
The rear bench seat and seat backrest may
fold forwards, even when you are driving.
As a result, the vehicle occupant will be
R
pushed into the seat belt with increased
force. The seat belt may not be able to
provide the intended protection and could
cause additional injury.
A child restraint system will no longer be
R
properly supported or positioned and will
no longer fulfil its function as intended.
Objects or loads in the boot or load com-
R
partment will not be restrained by the seat
backrest.
Before each journey, make sure that the
#
rear bench seat and the seat backrest
are fully engaged.
In vehicles with longitudinally adjustable rear
seats, you can also adjust the angle of the rear
seat backrests. There are several possible detent
positions.
F243 0059 02
* NOTE Damage to the release loops due to
the attachment of objects
The release loops of the seat backrests in the
rear may be damaged due to the attachment
of objects.
Only attach objects to the tie-down eyes.
#
Advertisement
Table of Contents
