Table of Contents
Advertisement
Combo 1 vehicle socket
Combo 2 vehicle socket
Press the centre on the rear area of the
#
socket flap
1
and swivel the socket flap to
the front.
The % indicator lamp
2
display
3
light up white.
%
The socket flap
1
can also be opened via the
multimedia system (
page 265).
/
F243 0059 02
Press catch
#
socket cover 5.
%
only the connection
charging cable connector. Only open the
upper part of the socket cap 5.
For charging at a mains socket insert the
#
mains plug into the mains socket of the exter-
nal power source to the stop.
Flexible Charging System Pro: if necessary,
#
switch off protective earth detection and set
maximum charge current (see operating
instructions of the charging system).
Fully insert the charging cable connector into
#
vehicle socket 8. If the wallbox/charging
station is not equipped with a charging cable,
fully insert the plug of the vehicle's charging
cable into the wallbox/charging station
socket.
Make sure that the charging cable is not taut
and top status
when inserted.
The # indicator lamp
display
high-voltage battery is charged, green.
Driving and parking 257
7
to the left and fold open
8
is required for the
4
and lower status
3
flash orange and, as soon as the
Advertisement
Table of Contents
