Table of Contents
Advertisement
166 Seats and stowing
* NOTE Damage to the seat backrest handle
caused by pulling
The handle can be damaged if it is used to pull
the seat forwards.
Move the seat forwards by the seat
#
backrest.
Move the seat forwards by the seat backrest.
#
Hold the seat firmly in place while doing so.
Folding the seat backrest back to the upright
position (vehicles with third row of seats)
Swivel seat backrest back until it engages.
#
The seat backrest will remain in the cargo
position.
Slide the seat backwards.
#
The seat will stop in the front position.
Move the seat into the desired position
#
(
page 162).
/
If necessary, fold in the seats on the third row
#
(
page 183).
/
%
To increase the size of the luggage compart-
ment, you can move the seat backrests into
the luggage compartment floor position
(
page 28).
/
Head restraints
▌Adjusting the front seat head restraints man-
ually
& WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
if you adjust the driver's seat, the head
R
restraint, the steering wheel or the mirror
while the vehicle is in motion
if you fasten your seat belt while the vehi-
R
cle is in motion
Before starting the vehicle: in particular,
#
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
F243 0059 02
& WARNING Risk of injury due to head
restraints not being fitted or being adjus-
ted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an
increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
Always drive with the head restraints fit-
#
ted.
Before driving off, make sure for every
#
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
Advertisement
Table of Contents
