Mercedes-Benz EQB 2023 Owner's Manual page 96

Occupant safety – Information on the automatic functions of the restraint system
94
* NOTE Damage caused by objects in the
footwell or behind the seat
The automatic adjustment of the seat position
may result in damage to the seat and/or the
object.
Stow objects in a suitable place.
#
®
Reversing the PRE-SAFE system measures
If an accident did not occur, the pre-emptive
measures that were taken are reversed.
You will need to perform certain settings yourself.
If the seat belt pre-tensioning is not reduced,
#
move the seat backrest slightly backwards.
The seat belt pre-tensioning releases.
Seat belt adjustment function
Vehicles with PRE-SAFE ® : after you have fastened
the seat belt of the front seat, it may adjust itself
against your body by pulling at the shoulder until
somewhat tight. Do not hold the seat belt tightly
while it is adjusting.
This function is a reminder that all vehicle occu-
pants must wear their seat belts correctly.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
( page 94).
/
Activating/deactivating seat belt adjustment via
the multimedia system
Multimedia system:
© Settings Vehicle
4 5 5
Occupant protection
5
Activate or deactivate Belt adjustment.
#
Overview of the automatic measures after an acci-
dent
Depending on the type and severity of the acci-
dent, and depending on the vehicle's equipment,
the following measures can be implemented, for
example:
automatic braking (post-collision brake)
R
( page 94)
/
F243 0059 02
activating the hazard warning lights
R
triggering an automatic emergency call
R
( page 50)
/
switching off the drive system and high-volt-
R
age on-board electrical system
unlocking the vehicle doors
R
lowering the side windows
R
displaying the emergency guide in the central
R
display ( page 51)
/
switching on the interior lighting
R
Function of the post-collision brake after an acci-
dent
Depending on the accident situation, the post-col-
lision brake can minimise the severity of a further
collision or even avoid it.
If an accident is detected, the post-collision brake
can initiate automatic braking. When the vehicle
has come to a standstill, the electric parking
brake is automatically applied.