Black & Decker BES602 Original Instructions Manual page 8

ENGLISH
When cutting conduit, pipe or angle iron, clamp work in a vise
if possible and saw close to the vise. To cut thin sheet materi-
als, "sandwich" the material between hardboard or plywood
and clamp the layers to eliminate material vibration and tear-
ing. By doing this, the material will be cut smoothly. Lay out
your pattern or cutting lines on top of the "sandwich".
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on the tool,
unplug the tool before cleaning it.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
V
AC
Power input W
No-load speed min
-1
Max depth of cut
Wood mm
Steel
mm
Aluminium mm
Weight kg
8
(Original instructions)
BES602 BES603
220 - 240V 220 - 240V
400
3000 0 - 3000
65
6
10
1.6
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 62841:
Cutting boards (a
Cutting sheet metal (a
EC declaration of conformity
MACHINERY DIRECTIVE
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 62841-1:2015 + AC:2015 +A11:2022, EN
62841-2-11:2016 + A1:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Declaration of conformity
The Supply of Machinery (Safety)
400
Black & Decker declares that these products described under
"technical data" are in compliance with:
65
The Supply of Machinery (Safety) Regulations, 2008, S.I.
6
2008/1597 (as amended),
EN 62841-1:2015 + AC:2015 +A11:2022, EN 62841-2-11:2016
10
1.6
) 90 dB(A), uncertainty (K) 5 dB(A)
pA
) 98 dB(A), uncertainty (K) 5 dB(A)
WA
2
) 7,8 m/s , uncertainty (K) 1.5 m/s
h
,B
2
) 7,0 m/s , uncertainty (K) 1.5 m/s
h
,M
%
BES602, BES603 Jigsaw
manual.
Black & Decker.
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
Regulations 2008
BES602, BES603 Jigsaw
+ A1:2020"
2
2
31/03/2023