Routing Configuration; Configuring Static Routing - Watchguard V10 User Manual

Apply
If you have only changed Link Speed, MTU, or the HA
configuration, the system will not restart. If you have made
any other changes to the Interface configuration for the
appliance, a Warning dialog box appears alerting you that
this action forces a restart of the system.
- Click Yes to proceed.
The appliance immediately restarts in order to apply the
new interface configurations. The System Configuration
dialog box closes and Vcontroller displays the Log In dia-
log box.
If you have changed the Interface 0 (Private) settings, be
sure to use the new IP address when next logging in to
Vcontroller.

Routing Configuration

Use the Routing tab to record static routes or set up
dynamic routing using several dynamic routing protocols.

Configuring static routing

To add static routes:
1
Click the Routing tab.
Both the static and dynamic routing settings are displayed.
Firebox Vclass User Guide
To immediately commit the settings to the Firebox
Vclass appliance.
N
N
Routing Configuration
OTE
OTE
107