Watchguard V10 User Manual page 127

System IP
System Mask
Interface 0
Interface 1
Backup WAN is not supported in Transparent Mode.
Interface 2
Interface 3
Interfaces HA1 and HA2
Firebox Vclass User Guide
This is the IP address that applies to all network
interfaces on a Vclass appliance deployed in
Transparent Mode.
This is the network mask for all interfaces on a
Vclass appliance deployed in Transparent Mode.
This represents interface 0, which should be used
for all private, or trusted, network traffic.
This represents interface 1, which should be used
for all public, or external, network traffic. Interface
1 supports the Backup WAN feature, which allows
the connection to automatically switch over to a
backup ISP in the event of a network failure.
N
Interface 2 should be assigned to any DMZ
network traffic. This interface is not available on
the V10, V100, or V200 models.
Interface 3 should be assigned to any DMZ
network traffic. This interface is not available on
the V10, V100, or V200 models.
Certain Firebox Vclass appliance models include
two HA ports, HA1 and HA2. HA ports are used
with the High Availability feature, which allows
Interface Configuration
OTE
95