Watchguard V10 User Manual page 216

CHAPTER 8: About Security Policies
4
From the Type drop-down list, select the appropriate
option.
5
To create a service group combining a protocol and
port number:
- Select Single Service from the Type drop-down
- From the Protocol drop-down list, make the
- In the Server Port field, type the port number
- Click Done.
6
To create a service group containing a single protocol
and a range of port numbers:
- Select Service Range from the Type drop-down
- From the Protocol drop-down list, make the
- In the Start Server Port field, type the lowest port
- In the End Server Port field, type the highest port
184
list.
appropriate selection.
used by this protocol.
list.
appropriate selection.
number used by this protocol.
number.
Vcontroller