Watchguard V10 User Manual page 462

CHAPTER 19: Setting Up a High Availability System
These default HA settings include the following:
- All of the appliance's interfaces will be
- The HA heartbeat interval is set to one beat every
- The HA Group ID, which uniquely identifies this
- The HA heartbeat is sent through the HA1
430
monitored. If any interface is detected as "LINK-
DOWN," the standby appliance will take over.
second.
group (pair) of Firebox Vclass appliances
currently backing each other up, is recorded as 3.
interface.
Vcontroller