Watchguard V10 User Manual page 179

3
In the Site (IP) field, type the IP address to block, then
click OK.
The new or edited site address is listed in the Blocked IP List.
To add an IP address to the exception list:
1
Click the Blocked Sites tab.
The System Configuration Blocked Sites window appears.
2
To add an exception, click the Add button under the
exceptions list. To edit an exception list entry, select the
entry and click Edit.
The Add or Edit Site dialog appears.
3
In the Site (IP) field, type the IP address exception,
then click OK.
The new or edited site address is listed in the Exception List.
To delete a blocked site or exception list entry:
1
Click the Blocked sites tab.
The System Configuration Blocked Sites window appears.
2
Select an entry from the Blocked Sites List or the
Exceptions List, and click Delete.
You can select multiple IP addresses by holding the Shift key to
select multiple contiguous IP addresses, or by clicking the
Control key and selecting multiple discontinuous IP addresses.
Firebox Vclass User Guide
Blocked Sites Configuration
147