Table of Contents
Advertisement
Maintenance & Servicing
Maintenance & Servicing
WARNING!
•
should install and
Only qualified technicians
service the appliance. For assistance finding
a qualified technician, please visit our Service
Company Locator at
truemfg.com/support/service-
locator.
•
(gas, electric,
Turn off and lockout all utilities
water) according to approved practices during
maintenance or servicing.
The appliance owner is responsible
for performing
a Personal Protective Equipment (PPE) Hazard
Assessment and ensuring adequate protection during
maintenance and cleaning procedures.
Use appropriate tools, safety equipment, and PPE
during installation and servicing.
Sharp Edges!
• Take care when moving, installing, cleaning,
servicing, and maintaining the ice machine to avoid
cuts. Be sure to take care when reaching under the
ice machine or handling metal components.
• Stay clear of pinch point areas, such as the space
between appliance doors and surrounding
cabinetry. Take care closing doors with children
nearby.
Page 26 of 36
AIR CURTAIN
WARNING!
Risk of electric shock or burn!
• Powering off an electronic control or setting
temperature controls to the 0 (off) position
NOT remove power from all
components. Unplug
the appliance or turn off the power supply before
installation or servicing.
•
clean appliance with a pressure washer or
DO NOT
hose.
Flammable refrigerant/insulation used!
licensed service provider service your appliance to
minimize the risk of possible ignition due to incorrect
parts or improper service and to ensure the operator's
health and safety.
Keep clear when uncrating,
Crush or cut hazard!
installing, moving, or servicing the appliance.
Moisture from improper drainage
Slippery Surfaces!
can create slippery surfaces near the appliance. It is
your duty to immediately warn your customers of, and
dry, the slippery surface. All wet floor areas must be
marked with a wet floor sign.
12/13/2023
P#975542
truemfg.com
Maintenance & Servicing (cont.)
• For additional maintenance instruction, please visit
the media center at truemfg.com.
• Any appliance adjustments are to be made
DOES
the appliance has been verified level and properly
supported.
The appliance owner is responsible for maintaining
Have a
the appliance as described in the installation manual.
Routine care and maintenance procedures are not
covered by TRUE's warranty.
Component Replacement
• Replace components with original equipment manufacturer
(OEM) components such as those shown in fig. 1. OEM parts
minimize the risk of possible ignition due to incorrect parts.
Use of non-OEM components may void TRUE's warranty.
• Have a licensed service provider service your appliance to
minimize the risk of possible ignition due to incorrect parts
or improper service and to ensure the operator's health
and safety.
TEC_TM_086 | REV. C | EN
TEC_TM_086 | REV. C | EN
AIR CURTAIN
USER ACTION!
AFTER
NOTICE!
Fig. 1. Example of OEM parts.
12/13/2023
truemfg.com
Page 27 of 36
Advertisement
Table of Contents
