Table of Contents
Advertisement
Installation & Setup (cont.)
Wire Shelving Installation
WARNING!
Overloading, incorrectly
installing, or improperly
loading shelves
can cause
shelf failure and negatively
affect appliance operation,
resulting in appliance damage,
product damage, or personal injury.
when
DO NOT use pliers or any crimping tools
installing shelf clips. Altering shelf clips in any way can
lead to shelving instability.
Installation Tips
• Install all the shelf clips before installing any shelves.
• Start at the bottom shelf and work your way up.
• Always lay the back of each shelf down on the rear clips
before the front.
Procedure
1. Hook the shelf clips into the shelf standards. See fig. 6.
2. Push up on the bottom of the clip. See fig. 7.
NOTICE ›
You may need to squeeze or twist the bottom of
the shelf clip for proper installation. Position all four shelf clips
equal in distance from the floor for flat shelves.
3. Ensure the shelf clip is not loose or able to wiggle out of the
shelf standard. See figs. 8 and 9.
4. Place the shelves on the shelf clips with the cross support bars
facing down.
NOTICE ›
Be sure all shelf corners are properly seated.
Page 20 of 36
AIR CURTAIN
Fig. 6. Installing top tab of shelf clip.
Fig. 7. The bottom tab of the shelf clip
will fit tightly.
Fig. 8. You may need to squeeze or twist
Fig. 9. Installed shelf clip.
the bottom of the shelf clip to install.
Shelf
Standards
Shelf
Shelf
Shelf
Clip
12/13/2023
P#975542
truemfg.com
Installation & Setup (cont.)
Product ID Strip Installation
Procedure
1. Turn the wire shelf around. The back of the shelf becomes the
front. See fig. 1.
2. With the larger strip opening on the bottom, snap the flavor
strip onto the shelf. See figs. 2-3.
3. Install tags into the flavor strip. See fig. 4.
TEC_TM_086 | REV. C | EN
TEC_TM_086 | REV. C | EN
AIR CURTAIN
A
B
Fig. 1. Turn the shelf around.
Fig. 2. Snap the product ID strip onto the shelf with the larger side on the bottom.
Fig. 3. Install the product ID strip.
Fig. 4. Install product labels in the
product ID strip.
12/13/2023
truemfg.com
Page 21 of 36
Advertisement
Table of Contents
