Uploading Files From Wdt2200 To Host Using The Kermit Server - Wasp WDT2200 Operation Manual

5.3.4 Uploading files from WDT2200 to HOST using the Kermit Server

Having collected the data into the WDT2200, the user can upload one or more collected data
forms to your PC.
On the WDT2200:
Connect the RS-232 port of the WDT2200 to the COM port of your PC with a null modem
•
cable.
Press the power key to turn on the WDT2200.
•
Check the WDT2200 protocol and communication parameter settings.
•
Press and hold down the [CMD] key for 2 seconds to enter the User mode, then select
•
"3.COM" in User mode to enter the Kermit server mode. (See On the HOST, immediately
below, to do file uploading from the Host side)
On the HOST:
Run the WDT2200's KERMIT.EXE utility program on PC.
•
First, set communication parameters to match the portable's, then invoke the upload
•
command by entering "GET filename".
Enter [Q] to return to DOS.
•
© 2003 Wasp Technologies, Inc.
Page 36 of 41