Wasp WDT2200 Operation Manual page 21

Page 21 of 41
To reallocate memory, go to the Supervisor Mode screen and press 3 (3.M_SIZE) to setup the
Execution Program Area size, key in the new memory size then press [ENT].
You can allocate available RAM between the Execution Program and RAM Disk area. The size of
RAM Disk will decrease when you increase the size of the Execution Program area, and vice versa.
The second line in the EXEC MENU shows Min and Max number of kilobytes that can be
allocated to the Execution Area.
3.2.3.4 FormCaching Application Program
FormCaching is a built-in application program that allows users to create a data entry application by
specifying field prompt, field length, data type, input method and delimiter, etc. without writing a
program and loading it (download or manually) to the WDT2200.
Enable the FormCaching application by selecting 4 (4.FORM) in the Supervisor mode menu. When
FormCaching is enabled, the WDT2200 will first ask the user to specify data fields in four
categories including field prompt, data length, and data type and device type. After defining all data
fields, the user must press [CMD] then the [Alpha] key to end the setup of the data field.
© 2003 Wasp Technologies, Inc.