en
Coupling
►
Push the attachment onto drill and reamer 6 until
it engages with a click, see Fig. 9.
Fig. 9
Uncoupling
►
Turn rotating sleeve 5 in the direction of the arrow
(clockwise when viewed from the rear end of drill
and reamer 6).
►
Remove the attachment from drill and reamer 6.
5
Fig. 10
12
6
6
Protection against inadvertent activation
The rotational speed control button can be locked to
prevent inadvertent activation of the drill and reamer
during a tool change.
►
To lock rotational speed control button 8: Turn
safety catch 9 to its OFF position, see Fig. 11.
The speed control knob 8 is blocked and the drill
and reamer 6 cannot be operated.
►
To unlock rotational speed control button 8: Turn
safety catch 9 to its ON position, see Fig. 11.
The speed control knob 8 is unlocked and the drill
and reamer 6 can be operated.
7
8
9
6
Fig. 11
Coupling tools in the tool chuck adapter
Note
The coupling of tools is described in instructions for use
TA011936 (Acculan 3Ti) and/or TA014540 (Acculan 4).