Pro-Form CROSSWALK 397 User Manual page 10

7. Position the Conso[e Crossbar (61) between
the Left and Right Handrails {59, 64) with
the Console Ground Wire (47) pos{tioned as
shown.
Attach the Console Crossbar (61) to the Left
and Right Handrails (59, 64} with the other four
5/16" x 3;4" Screws (5) and the other four 5/16"
Star Washers (6) that y_u removed in step 6.
Start all four Screws, and then tighten them.
64
8. With the help of a second person,hold the con*
soIe assembly near the Right Handrail (64).
Connect the Upright Wire {63} to the console
wire, See the inset drawing. The connectors
should slide together easily and snap into
-place. If they do not, turn one connector and try
again, IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY_ THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER, Then, remove the wire tie from
the Upright Wire.
Connect the Console Ground Wire (47} on the
Console Crossbar (6l) to the grQund wire on the
console.
8 Console
Assembly,-.
lO