Table of Contents
Advertisement
Insert the wires into the Right Handrail (64)
through the indicated hole as you set the con-
sole assembly on the Left and Righl Handrails
(59, 64). Make sure that no wires are pinched.
Attach the console
assembly with four #8 x 3t'4"
Screws
(4). Start el! four Screws,
and then
tighten
them,
Do not overtighten
the Screws.
See assembly step 5. Firmly tightenthe six 3/8"
x 3 114"Screws (2) on the lower ends of the Left
and Right Uprights (66, 76) (only one side is
shown).
ConsoleAssembly
Ground
Wires
10. Attach the two Console Clamps (83) to the con-
sole assembly with four #8 x !" Screws (7),
10
Console
Assembly
11
Advertisement
Table of Contents
