Pro-Form CROSSWALK 397 User Manual page 8

3.Press aBase Cap (70) into the B ase (74).
Make sure that the U pright Grommet (73) is
pressed inlo t he s quar ehole inthe B ase (74).
7O
4.Identify
the Right UPright (76), which is marked
"Right. ° Have a second person hold the Right
Upright near lhe Base (74).
See the inset drawing. Tie the wire tie in the
Right Upright (76) securely around the end of
the Upright Wire (63). Then, insert the Upright
Wire into the lower end of the Right Upright as
you pull the other end of the wire tie through the
Right Upright,
76