Table of Contents
Advertisement
CARBURETOR
CARBURATEUR
If carburetion is not perfect, the perfor-
mance of the engine will be adversely
affected.
Therefore,
the
carburetor
should be set correctly to meet such
Conditions as weather, race field, etc
First, check the carburetor thoroughly,
and adjust the following parts as neces-
sary:
Si la carburation n'est pas parfaitement
réglée, les performances du moteur en
seront réduites. C'est pourquoi il y est
nécessaire d'adjuster le carburateur pour
convenir aux conditions climatiques, au
terrain de la course, etc. Vérifier con.
venablement le carburateur et, le cas
échéant, régler les piéces suivantes:
Vis de réglage d'air 1%
Hauteur du flotteur 292210 mm
|
(1.1530.04 in.)
CARBURETOR/CARBURATEUR
——
FLOAT HEIGHT.
Proper carburetion for the entire range of
the engine speeds
assumes first that the
float is set for the prescribed level. This
level is expressed in terms of "height
A"; the height must be checked and set
right before attempting to alter the
jetting. Hold the removed carburetor
upside down, taking care not to allow.
float arm pin and arm to slip off, Raise
float arm with a fingertip and lower it
gradually until it touches the needle
valve. Measure the distance
A with
calipers. If the caliper reading is off the
specification bend the tongue.
Advertisement
Table of Contents
