Allen-Bradley A-B QUALITY DL20 Series User Manual page 135

The following is an example of WRITE TO TAPE.
DL20 Prompt
WRITE TO TAPE?
UNPLUG TERMINAL
HIT STOP/REWIND
PLUG IN 1770-SB
PRESS RECORD ON TAPE
PUT TOGGLE ON RECORD
TIME LEFT: 15
(counts down to 1, then additional 10
second delay)
ADDR:
(counts up as data is output)
PUT TOGGLE ON OFF
HIT STOP / REWIND
UNPLUG 1770-SB
PLUG IN TERMINAL
VERIFY TAPE?
Appendix B
Tape Recorder Setup
Action Required
Type [Y] [Return] on the terminal.
Unplug the cable (2706-NC1) from the Industrial Terminal.
Press Stop/Rewind on the data recorder and wait for the tape
to rewind.
Plug the cable (Catalog No. 2706-NC4) into the OTHER
PRODUCTS port on the data recorder.
Press Record on Tape button on the data recorder.
Put toggle switch on cable (Catalog No. 2706-NC4) to the
REC position.
Wait until timer counts down. An additional 10 second pause
occurs.
Wait while data is being transferred.
Put toggle switch on cable (Catalog No. 2706-NC4) to the
OFF (middle) position.
Press Stop/Rewind button on the data recorder.
Unplug the cable (2706-NC4) from the data recorder.
Reconnect the cable (Catalog No. 2706-NC1) to the Industrial
Terminal port B.
Answer [Y] and follow the prompts, press [N] to return to edit.
B–9