Allen-Bradley A-B QUALITY DL20 Series User Manual page 129

5. Select desired function: WRITE TO TAPE, READ FROM TAPE or
VERIFY TAPE.
6. Follow the instructions provided by the DL20. The following is an
example of WRITE TO TAPE.
DL20 Prompt
WRITE TO TAPE?
HIT STOP/REWIND
PLUG IN 1770-SB
PRESS RECORD ON TAPE
PUT TOGGLE ON RECORD
TIME LEFT: 15
(counts down to 1, then additional 10
second delay)
ADDR:
(counts up as data is output)
PUT TOGGLE ON OFF
HIT STOP / REWIND
UNPLUG 1770-SB
VERIFY TAPE?
Appendix B
Tape Recorder Setup
Action Required
Type [Y] [Return] on the keyboard.
Press Stop/Rewind on the data recorder and wait for the tape
to rewind.
Plug the cable (Catalog No. 2706-NC4) into the
CONTROLLER EQUIPMENT port on the data recorder.
Press Record on Tape button on the data recorder.
Put toggle switch on cable (Catalog No. 2706-NC4) to the
REC position.
Wait until timer counts down or press [Esc]. An additional 10
second pause occurs.
Wait while data is being transferred.
Put toggle switch on cable (Catalog No. 2706-NC4) to the
OFF (middle) position.
Press Stop/Rewind button on the data recorder.
Unplug the cable (2706-NC4) from the data recorder.
Answer [Y] and follow the prompts, press [N] to return to edit.
B–3