6
PRE-INSTALLATION OF THE MACHINE
Un-boxing the machine
1. Carefully check the transport box for any signs of damage. Report any damage to the carrier immediately.
2. Check the contents list. Contact the distributor if any items are missing
Contents:
150Ah bateries (deliveries to Switzerland are delivered without batery - op�onal 105Ah batery)
•
•
24 V Batery charger
•
Suc�on nozzle
•
1 Driving disc, 1 brush
Pads must be purchased addi�onally.
3. The machine is packed in special packaging on a pallet for transport by forkli� trucks. The packages must not
be stacked on top of each other.
4. Before unpacking the machine, remove the fasteners and the straps that have secured the machine to the
pallet. Carefully unload the machine with the help of other persons.
WARNING: Do not push the machine off the pallet unless an access ramp is used, otherwise the machine may
be damaged.
INSTALLING BATTERIES
WARNING: Risk of fire or explosion. Bateries release hydrogen gas. Keep away from sparks and open
flames.
Keep the batery cover open when charging. You must follow the manufacturer's instruc�ons carefully, otherwise
the manufacturer will not be responsible for the consequences.
FOR SAFETY: Wear protec�ve gloves and eye protec�on when installing the machine. Avoid contact with
with batery acids.
1. Place the machine on flat surface and check that the main switch is turned off.
2. Lock the machine by ac�va�ng the electronic brake.
3. Ensure that the dirty water tank is empty, otherwise empty completely.
4. Carefully insert the bateries into the batery compartment. Arrange the bateries as illustrated (Figure 2).
5. Place the bateries in the compartment, with the red ones on + and the black once on -.
www.cleanfix.com
Figure 1
Figure 2
9
Need help?
Do you have a question about the RA565 IBCIBD and is the answer not in the manual?