WORKING WITH AUTOCAD
AutoCAD can support the Intuos4 tablet as a Windows system pointing device or as a Wintab compatible
digitizer. By default, AutoCAD is configured to use Intuos4 as a system pointing device.
Follow the below procedures if you will be using Intuos4 with tablet menus or to digitize drawings to proper
scale.
Note: To configure the mouse or lens cursor for left-handed use in AutoCAD or similar applications, open the
Wacom Tablet control panel, click on O
Configuring AutoCAD for a Wintab compatible digitizer
Configuring tablet menus and screen pointing areas in AutoCAD
Calibrating Intuos4 for AutoCAD
CONFIGURING AUTOCAD FOR A WINTAB COMPATIBLE DIGITIZER
1. Start AutoCAD. Open the T
2. From the O
PTIONS
3. Under C
P
URRENT
OINTING
4. Decide from which device AutoCAD will accept input. Choose an option from the A
section:
•
D
O
IGITIZER
NLY
•
D
IGITIZER AND
mouse.
5. Click OK to close the O
Contents
PTIONS
menu and select O
OOLS
window, select the S
YSTEM
D
, select the W
EVICE
. The AutoCAD drawing editor only accepts input from Intuos4.
M
. The AutoCAD drawing editor accepts input from both Intuos4 and your
OUSE
window.
PTIONS
Contents
Index
... and select L
in the M
EFT
.
PTIONS
tab.
INTAB COMPATIBLE DIGITIZER
Index
H
group.
OUSE
ANDEDNESS
option.
I
CCEPT
NPUT
77
F
ROM
77